Nowadays, the home decoration is inseparable from the installation of chandeliers. In addition to lighting, good -looking chandeliers play a role in decorative space, which can make the home environment more beautiful.

Although the style and size of the chandelier will be different, the installation steps are similar. Let's take a look at the installation steps of the chandelier ~

01 Precautions before installation

① Check the installation environment, use the electrical metering pen to check whether the user's home line is normal, and check the surrounding environment of the line.

② Check whether the outer packaging of the chandelier is damaged, then open the packaging, take out the accessories one by one, and check whether the main body and accessories are missing or damaged according to the installation instructions. If you have any, please contact the customer service to deal with it.

③ Take out the required tools and place it on the tool pad to prevent the tool from scraping the user's floor. In addition, the chandeliers and accessories are placed on the soft surface (such as foam plates) to prevent scratching lights.

④ Prepare materials before the chandeliers are installed, such

 as wooden strips, plates, hardware accessories, screws, hammers and other tools are indispensable.

⑤ You need to measure the size of the chandelier, determine the specific installation location, and check the line direction near the punching, and the distance of the punching position, and try to install it as much as possible. In addition, pay attention to detecting the bearing gravity of this location.

02 Installation steps

① Install the base: The base is placed in the expected installation position, marked with a pencil on the wall, and then took away the base and drilled with an electric drill at the label position.

Then install the expansion bolts for fixed bases in the hole. Pay attention to the diameter of the drilling hole and the depth of the buried depth. Then put the base back to the mark position and fix it.

When punching, use the appropriate drill, which is about 4-5cm depth. Use a dust cover or plastic bag to put it on the drill to prevent the dust from flying. If you drill the steel bars inside the wall when punching, you can adjust the position appropriately to continue punching.

② Construction chandelier: When assembling, please refer to the installation instructions of the chandelier to assemble, and tighten the nut of each light arm one by one to prevent loosening. Then install the upper and lower decorative cover and suction plate of the chandeliers.

③ Test lighting of chandeliers: Install all the light sources of the chandeliers, connect the test line, and try on. Repeat a few more times to ensure that there are no problems to install. If you have any problems, the master should communicate with users in time.

④ Connect the wire: Connect the top plate and the suspension chain, raise the chandelier near the top line, make it connect to the main line with the top line, and then use the insulating tape to wrap the wire.

Sort the line into the suction plate, and fix the suction top plate with a decorative nut. You can add the nut to fix it when the screw is relatively long. After installation, users need to determine whether the height of the chandelier is suitable.

Connect the wire through the boom to the core. If there is a switch with a band of the chandelier, you need to pay attention to the direction of the line when you take the line.

⑤ Constant installation: After the wiring, turn on the light again to check whether the chandelier lighting is normal, and then remove the problem after installing the lampshade.

Remember to turn off the power after the power is normal to continue to install the lampshade and pendant of the chandelier. The actual suspension of each lamp is different, and the installation order can be explained.

03 Check inspection after installation

① Check the order of control and chandeliers corresponding to ensure that all light heads in the chandelier are bright. If the product has segmented functions, it is necessary to ensure that the segmented operation is not faulty. If the problem is found, the power must be disconnected. repair.

② After the installation is installed, clean up the garbage such as the on -site chandelier packaging and the installation of the line head.